TOP QUALITY PENNSYLVANIA BLUESTONE

 

 

 

 

 

 

 

VIECZOREK NATURAL STONE: GOING THE EXTRA MILE FOR QUALITY BLUESTONE!

Pennsylvania Bluestone

     Specialty Work

  Recent Jobs

Quality Standards

          Packaging
         Veneer
               About

Bluestone Coping

   Thermal Bluestone

Natural Cleft Bluestone

Pennsylvania Fieldstone

Countertops

           Buff Stone  
      
        

 

 

 

Quality Is Our Top Priority so we always go the extra mile!

Color Issues - When you order blue Pennsylvania Bluestone as apposed to full color, you can rest assured that you will receive blue and only blue.  There will be no discolorations in your stone.  All non-blue stone is trimmed or sorted out to full color pallets.

Cut Issues - All treads are cut perfectly square with laser guided gantry saws.  Dimensionally speaking these cuts are on the money so a 2'x4'x2" will be exactly 24"x48"x2" consistently.  Thermal pattern flagstone on the other hand will be a 1/2" short both in length and width.  A 2'x3' piece will therefore be 23.5"x35.5" exactly and consistently.  Pattern Flagstone has traditionally been cut a half inch short to allow for 1/2" cement joints. Natural cleft pattern flagstone is roughly 1/2" short so a 2'x3' unit will be roughly 23.5"x35.5".   

Unacceptable Stone - As we cut through the stone and prepare special orders it is inevitable that we will run into stone with significant flaws.  Now and then we find small areas of shale, coal and other deposits.  These pieces are discarded.  Sometimes when we thermal stone it becomes obvious that there are areas of unacceptable density and the stone thermals unevenly.  These pieces are also discarded.  When your stone arrives it must be perfect.  All Face edges and corners are sharp and never chipped.

 

 

 

 

 

 
     
           
    
    
   
    
      
     
 

COPYRIGHT 2009  ALL RIGHTS  RESERVED